Basic Operation - Hitachi CP-S220W User Manual

O O P P E E R R A A T T I I O O N N S S ( ( c c o o n n t t i i n n u u e e d d ) )

Basic Operation

Basic manipulation to show in the table 1-2 can be done easily by the control panel of projector and
the attached remote controller. (The item of
Use the remote control in front of the remote control photoreceptor at a distance of about
3 m or less and an angle of 30 degrees to the left or right of the center.Be careful of the
strong light and the obstacle because it sometimes obstructs remote controller
manipulation.
Table 1-2. Basic Operation
Item
Sequential switching of the input signal : Push INPUT
RGB → VIDEO → S-VIDEO (→ RGB)
The selection of input of RGB : Push RGB button.
INPUT
VIDEO/S-VIDEO → RGB
SELECT
The selection of input of VIDEO/S-VIDEO : Push VIDEO button.
RGB → VIDEO/S-VIDEO
*The signal name chosen at the time of a change in an input signal is
displayed for about three seconds.
A setting/release of the centering control mode : Push POSITION button.
Icon [
The accommodation of the image location : Push
by the centering control mode.
POSITION * It is effective by the VIDEO/S-VIDEO input only at the time of the
expansion mode.
* Icon [
automatically when it passes for about 10 seconds under the condition
that manipulation isn't done.
The format of the menu item : Choose an appropriate item and push
RESET
RESET ⊕
The format of the centering control : Push RESET
centering control mode.
The setting of the magnify mode : Push MAGNIFY
The movement of the magnify region : Do "centering control" by the
magnify mode.
The accommodation of the magnify multiplying factor : Push
MAGNIFY
MAGNIFY
A release of the magnify mode : Push MAGNIFY
* Expansion is canceled due to the execution/setting of "AUTO" "ASPECT"
"VIDEO" or the change in the input signal.
A setting/release of the FREEZ mode : Push FREEZE button.
It is displayed, and an image rests by the rest mode icon [II].
* Rest is canceled due to the execution/setting of "centering control"
FREEZE
"sound volume" "noise reduction" "AUTO" "BLANK ON/OFF" or "MENU
ON/OFF", the change in the input signal.
* Be careful not to forget a release the static image when it rests.
⊕ can manipulate with the control panel.)
] is displayed by the centering control mode.
] disappears, and centering control mode is canceled
button.
/ by the magnifyn mode.
Description
S-VIDEO ↔ VIDEO
button.⊕
, , , button
button by the
button.
button.
OFF
1-9