Power Cord Set Requirements - Compaq TFT5010 User Manual

Power Cord Set Requirements

If you were not provided with a power cord for your monitor, you
should purchase a power cord that is approved for use in your
country. The power cord must be rated for the product and for the
voltage and current marked on the product's electrical ratings label.
The voltage and current rating of the cord should be greater than
the voltage and current rating marked on the product. In addition,
2
the diameter of the wire must be a minimum of 0.75 mm or
18AWG, and the length of the cord must be between 6 feet (1.8 m)
and 12 feet (3.6 m). If you have questions about the type of power
cord to use, contact your Compaq authorized service provider.
A power cord should be routed so that it is not likely to be walked
on or pinched by items placed upon it or against it. Particular
attention should be paid to the plug, electrical outlet, and the point
where the cord exits from the product.
Spcifications 1-22