Vivotek FE8174V User Manual page 205

speedapp -5 ~ 5
auto pan
patrol
stop
zoom wide
tele
stop
zooming wide or tele
zs 0 ~ 6
0 ~ 15 <SD81X1>
vx <integer , excluding 0> The slope of movement = vy/vx, used for joystick control.
vy <integer>
vs 0 ~ 7
0 ~ 15 <SD81X1>
x <integer>
y <integer>
videosize <window size>
resolution <window size>
stretch <boolean>
focus auto
far
near
iris auto
open
close
speedlink 0 ~ 4
gaptime 0~32768
Set the auto pan/patrol speed.
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Zoom without stopping for larger view or further view with zs
speed, used for joystick control.
Set the speed of zooming, "0" means stop.
Set the speed of movement, "0" means stop.
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
The size of plug-in (ActiveX) window in web page
The resolution of streaming.
0 indicates that it uses resolution (streaming size) as the range
of the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of
the coordinate system.
Auto focus.
Focus on further distance.
Focus on closer distance.
Let the Network Camera control iris size.
Manually control the iris for bigger size.
Manually control the iris for smaller size.
Issue speed link command.
The gaptime between two consecutive ptz commands for device.
(unit: ms)
VIVOTEK
User's Manual - 205