Status Indicator; Display - LG WDM-124405TDS Owner's Manual

H ow to use washer

Display

1. Special function display
• When Child lock is selected, the
" " lamp is on.
• When time delay is selected, it shows
the remaining times to finish the selected
program.
2. Self diagnose display
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
" " : Water pressure sensing error
" " : Problem of overfilling water
" " : Door is not closed
" " : Over load in motor
" " : Water inlet trouble
" " : Drainage trouble
" " : Unbalanced load
" " : Water temperature trouble
" " : Water leaks
" " : The washer experienced a
power failure.
If these error letters are displayed, please
refer to the troubleshooting page 27 and
follow the guide.
22
3. Completion of washing
• When washing cycle is completed,
" " is displayed on the "Multi display".
4. Time left
• During washing cycle, the remaining washing
time is displayed.
• Recommended program by manufacturer.
❋ ( ) : WD(M)-14440(5)TDS
- Cotton : around 1 hour and 54(51) minutes
- Synthetic : around 1 hour and 24 minutes
- Delicate : around 1 hour and 12 minutes
- Hand Wash/Wool : around 57 minutes
- Quick 30 : around 30 minutes
- Duvet : around 1 hour and 12 minutes
- Baby Care : around 2 hours and 37 minutes
- Rinse + Spin : around 26(23) minutes
- Refresh : around 19 minutes
• The washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
Est. Time Remaining
• This display shows the estimated time
remaining in the cycle when operating.
• This washer automatically detects the
wash load (weight) and optimizes the
washing time. After detecting, the display
will show the adjusted time remaining.

Status Indicator

• It shows elapsed time of the cycle the
washer is operating.