Hitachi 51SWX20B Operating Manual page 58

Auto Channel Scan
Setup
Set The Channels
Ant A
Source
Antenna
Auto Channel Scan
Move Select
SEL
Setup
Set The Channels
Ant A
Auto Channel Scan
Scanning Channel Number: 66
SEL Cancel
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to erase additional channels.
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP ( ) or DOWN ( ).
Cable(1) Cable(2)
Start
Cancel
Setup
Set The Channels
Ant A
Source
THUMB
Antenna
STICK
Auto Channel Scan
Move Select
SEL
THUMB
STICK
SELECT
58
SETUP
Cable(1) Cable(2)
Start