Hitachi 51SWX20B Operating Manual page 18

Your Hitachi Television is equiped with an A/V Network feature. This feature helps to control your external Audio/Video equipment
(VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your Hitachi
TV Remote Control. You can use your Hitachi remote control to control the Audio/Video equipment command without the equip-
ment's remote control.
The Television rear panel has 2 IR BLASTER jacks. Each IR Mouse cable can connect up to 2 external Audio/Video components.
Therefore, you can connect the Television with up to four components. Please see the following example of an A/V Network setup
between your Hitachi Television and external Audio/Video equipment (VCR and DVD Player).
CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR BLASTER FOR A/V NETWORK
1. Connect your external Audio/Video components to the Rear Panel jacks as shown on pages 13~17.
2. Connect the IR Mouse cable to the IR BLASTER input of the Television's rear panel.
3. Place the IR mouse in front of the infrared sensor of the external components you wish to control.
NOTES: 1. The Rear Panel has two IR BLASTER inputs which can control up to a total of four external components.
2. The IR Mouse must be placed in front of the external components IR sensor for the A/V Network to work.
3. The correct codes must be entered for each of the Audio/Video components for the A/V Network to function
properly (see page 20).
4. Press the A/V NET button on the remote control. Use THUMB STICK
Use THUMB STICK
start upon the very first use. You can access the Setup Menu Wizard again in the future by pressing the A/V net button and
selecting SETUP.
VCR POWER CH
Set Top Box
Cable Box
b
TV/VCR
Amplifier
DVD
Move
ANT A
TO
CONVERTER
ANT B
AUDIO
TO HI-FI
CENTER
IN
IR
BLASTER
L
R
IR
Sensor
IR
Mouse
to enter component's "SOFT KEY" control button. The A/V Network Setup Wizard will automatically
CH
SETUP
MORE
CONNECTING A/V NETWORK
IR
Sensor
DVD Player
IR OUTPUT
P /C P /C Y L R
Mouse
R R B B
DVI-HDTV
P P Y
R B
INPUT 1
R (MONO)/L
P P Y/VIDEO
B
R
INPUT 2
R (MONO)/L
AUDIO
R (MONO)/L VIDEO S-VIDEO
INPUT 3
R (MONO)/L VIDEO
S-VIDEO
INPUT 4
R L VIDEO
S-VIDEO
MONITOR
OUT
AUDIO
R L V
OUTPUT
VCR
or to highlight the component you wish to set up.
18