Advertisement
• The sealed burners are secured to the cooktop and are NOT designed to be
removed.Since the four burners are sealed into the cooktop, boilovers won't seep
underneathto the burner box area. Thus, there are no hidden spills in the burner
box area to clean.
• Clean with warm soapy water and a sponge or dishcloth. Burned on grease can
be removedwith a householdcleaner, such as Fantastikor 409, and a sponge. To
prevent scratching,do not use abrasive cleaners or scrubbing pads.
Note: Be careful not to get water or spray into burner ports.
When cleaningaroundthe surfaceburner,use
/_,
_
care to prevent damage to the spark igniter
which is locatedatthe backsideofeachburner.
If a cleaning cloth should catch the igniter, it
could damage or break it. If the igniter is
Igniter
damagedor broken,the surfaceburnerwill not
light.
REARVIEWOFSEALED BURNER
The knobs on the control panel can be removed with the controls in the OFF position.
Pull each knobstraightfrom the shaft. Wash knobs in warm soapywater or dishwasher;
do not use abrasive cleansers or materials. To replace each knob, match flat part of
knob opening with the flat on the shaft, returning in OFF position.
Important: Never use a metal blade to pry knoboff. If knobcannot be easily removed,
tuck the folds of a cloth dishtowel under the knob skirt and pull the towel upward with
steady, even pressure.
Important- Be careful to replace the knobs with gentle pressure. Never hit the knob
on the shaft with your hand or any other object.
Wipe with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts
of soap and water, abrasives, or sharp objects on the panel. They can damage it.
11
Advertisement
