Table of Contents
Advertisement
,
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
This is particularly crucial when
using the cooker hood at the same
time as a heating appliance that
relies on oxygen from the same
room to avoid the danger of toxic
fumes building up.
Notes on the Appliance dimension
drawing:
1) Suction side
2) Motor can be rotated. Exhaust
socket can be fitted at the top or the
sides in any direction.
3) The motor unit can be freely
positioned. Connection to the appliance
is via the exhaust ducting and the
connection cable.
Please take the length of the
connection cable into account when
selecting the installation location.
The installation location must be easily
accessible. This is also important if the
appliance needs to be serviced.
4) If the cooker hood is being installed
near to a wall, a minimum distance of at
least 50 mm must be observed so that
the edge extraction panels and the
grease filters can be removed easily.
5) The cooker hood is secured in the
cut-out by clamps.
This requires that the ceiling is made of
a solid material, such as wood.
,
Make sure the material is strong
enough to bear the weight of the
cooker hood.
There must be a minimum distance of
40 mm between the areas around the
clamps and any structures or
components, such as struts or cables.
Installation
27
Hide quick links:
Advertisement
Table of Contents
