Administration > Reporting - Cisco Linksys WAG200G User Manual

Chapter4
IP Address fields. Select IP Range if you want to specify a
range of IP addresses that can access the Gateway. Then
enter the starting and ending IP addresses of the range.
NOTE: To manage the Gateway remotely, enter
h t t p : / / < I n t e r n e t _ I P _ a d d r e s s > : p o r t
substituting the
address for <Internet_IP_address>, and the
Management Port number for port.
Remote Upgrade
Remote Upgrade To allow remote upgrades of the
Gateway, select Enable. Otherwise, keep the default,
Dsable.
SNMP
SNMP is a popular network monitoring and management
protocol.
SNMP To use SNMP, select Enable. Otherwise, select
Dsable.
Allowed IP Select All if you want to allow access from
any IP address. Select IP Addr. if you want to specify the IP
address that can access the Gateway. Then complete the
IP Address fields. Select IP Range if you want to specify a
range of IP addresses that can access the Gateway. Then
enter the starting and ending IP addresses of the range.
Devce Name
Enter the name of the Gateway.
SNMP V1/V2
The version used is displayed.
Get Communty
Enter the password that allows read-only
access to the Gateway's SNMP information.
Set Communty
Enter the password that allows
read/write access to the Gateway's SNMP information.
Trap Management: Trap to
the remote host computer that will receive the trap
messages.
Remote Upgrade
To allow remote upgrade, select
Enable. Otherwise, keep the default setting, Dsable.
UPnP
Universal Plug and Play (UPnP) allows Windows to
automatically configure the Gateway for various Internet
applications, such as gaming and videoconferencing.
UPnP If you want to use UPnP, keep the default, Enable.
Otherwise, select Dsable.
IGMP
IGMP Proxy
Internet Group Membership Protocol (IGMP)
is a system to improve multicasting for wireless clients.
This should be set to Enable if your clients support it;
otherwise, select Dsable.
Wreless-G ADSL Home Gateway
Gateway's Internet IP
Enter the IP address of
Advanced Configuration
WLAN
If you are using the Gateway in a public domain where you
are giving wireless access to your guests, you can disable
wireless access to the Gateway's web-based utility.
Management va WLAN
This feature allows the Gateway
to be managed by a wireless computer on the local
network when it logs into the Gateway's web-based
utility. You will only be able to access the utility via a wired
connection if you disable this feature. To allow wireless
access to the utility, keep the default, Enable. Otherwise,
select Dsable.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Reporting
The Gateway can keep logs of traffic and events for your
Internet connection.
Administration > Reporting
Reporting
Log To disable the Log function, keep the default, Dsable.
To monitor traffic between the network and the Internet,
select Enable. With logging enabled, you can choose to
view temporary logs.
Syslog IP Address
Enter the IP address of the computer
that should receive logs.
E-Mal Alerts To enable E-Mail Alerts, select Enable.
Denal of Servce Thresholds
of Service attacks that will trigger an e-mail alert.
SMTP Mal Server Enter the IP address of the SMTP
server.
E-Mal Address for Alert Logs
that will receive alert logs.
Return E-Mal address Enter the return address for the
e-mail alerts. (This can be a dummy address.)
Vew Log To view the logs, click Vew Log.
Enter the number of Denial
Enter the e-mail address
22