Table of Contents
Advertisement
ADSL2+ Gateway with VoIP
• IEEE 802.3 Type/Length value (the value in the 13th and 14th octets of an Ethernet frame)
• Presence of a specified IEEE 802.1Q virtual LAN (VLAN) ID
• Packet length between specified minimum and maximum numbers of octets.
• Presence of a specified DSCP (Diffserv Code Point) value (one kind of QoS marker)
Apply. To enable the selection criteria on one line of the table, click that line's Apply box so a check appears in it.
To disable the line's criteria, click the box to clear.
When you have finished making changes in this window, click the Save button to save the changes, or click the
Cancel button to undo your changes. Then click Close. You will be returned to the Advanced Routing panel. Click
the Save Settings button to save your changes, or click the Cancel Changes button to undo your changes.
The Setup - Voice Tab
The Voice - Info Screen
This screen shows voice-related settings for the Gateway.
Product Information
Product Name. Shown here is the model number of the Gateway.
Serial Number. Shown here is the serial number of the Gateway.
Figure 6-17: Setup - Voice - Info
Software Version. Shown here is the version number of the Gateway software.
Hardware Version. Shown here is the version number of the Gateway hardware.
MAC Address. Shown here is the MAC address of the Gateway.
Client Certificate. Shown here is the status of the client certificate, which indicates that the Gateway has been authorized by
your ITSP.
System Status
Current Time. Displayed here is the current date and time of the Gateway.
Elapsed Time. Displayed here is the amount of time elapsed since the last reboot of the Gateway.
RTP Packets Sent. Displayed here is the number of RTP packets sent by the Gateway.
Chapter 6: Configuring the ADSL2+ Gateway
25
The Setup - Voice Tab
Advertisement
Table of Contents
