Cisco Linksys AG310 User Manual page 17

ADSL2+ Gateway with VoIP
Table 1: Interactive Voice Response Menu
Action Command (press these
keys on the telephone)
Check Primary DNS Server IP 160
Address
Check Internet Web Server Port 170
Check Local IP Address 210
Set Internet Connection Type 101
Set Static IP Address 111
Set Network (or Subnet) Mask 121
Set Gateway IP Address 131
Set Primary DNS Server IP 161
Address
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Choices Description
Hear the IP address of the
primary DNS (Domain Name
Service) server.
Hear the port number of the
Internet Web server used for
the web-based utility.
Hear the local IP address of the
Voice Gateway.
Press 0 to use DHCP. Select the type of Internet
Press 1 to use a static IP connection you are using.
address. Refer to the documentation
Press 2 to use PPPoE. supplied by your Internet
Service Provider (ISP).
Enter the IP address using First, set the Internet
numbers on the telephone Connection Type to static IP
keypad. Use the * (star) key address; otherwise, you will
when entering a decimal point. hear, "Invalid Option," if you try
to set the static IP address.
Enter the network or subnet First, set the Internet
mask using numbers on the Connection Type to static IP
telephone keypad. Use the * address; otherwise, you will
(star) key when entering a hear, "Invalid Option," if you try
decimal point. to set the network or subnet
mask.
Enter the IP address using First, set the Internet
numbers on the telephone Connection Type to static IP
keypad. Use the * (star) key address; otherwise, you will
when entering a decimal point. hear, "Invalid Option," if you try
to set the gateway IP address.
Enter the IP address using First, set the Internet
numbers on the telephone Connection Type to static IP
keypad. Use the * (star) key address; otherwise, you will
when entering a decimal point. hear, "Invalid Option," if you try
to set the IP address of the
primary DNS server.
11