Auto Program; Channel Memory; Closed Caption - Hitachi 50EX20B Operating Manual

SET UP
RECEPTION BAND
CATV1 or CATV2
AIR
CATV Indicated on the
CHANNEL screen
VHF 2-13ch VHF 2-13
UHF 14-69ch
Mid band A-1 14-22
A-5 - A-1 95-99
Super band J- 23-36
W
Hyper band
W+1 - W+28 37-64
Ultra band
W+29 - W+84 65-125
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV1 mode, set AIR/CABLE to CATV2

AUTO PROGRAM

This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over
unused channels when using the CHANNEL UP (
FOLIOHG2
<IMG SRC="ObjFF3.PCX">
If the MENU button is pressed while the auto programming function is engaged, programming will stop. See
CHANNEL MEMORY to add or erase additional channels.

CHANNEL MEMORY

Use this function after AUTOPROGRAM to add or erase additional channels to the remote control CHANNEL
buttons. Your choice will be highlighted in yellow.
FOLIOHG2
<IMG SRC="ObjFF4.PCX">
Add or erase additional channels while still in CHANNEL MEMORY using the CHANNEL
number buttons and then add or erase using the CURSOR

CLOSED CAPTION

Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are
2-13
) or DOWN ( ) buttons.
, buttons.
- 24 -
,
, buttons or