Save & Exit - MSI Z87-G43 GAMING User Manual

▶ Make U-Key at
Makes a key at the USB flash drive to prevent other people from accessing the
system. Only the user who has the key with the flash drive can access the system.
▶ Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶ Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit
▶ Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
▶ Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶ Save Changes
This item is used to save current changes.
▶ Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶ Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶ Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.
3-15 3-15 BIOS Setup BIOS Setup