MSI G41M-P34 User Manual page 24

CPu technology Support
Press <enter> to enter the submenu, that shows the technologies that the
installed CPu supported.
intel eiSt
the enhanced intel SpeedStep technology allows you to set the performance
level of the microprocessor whether the computer is running on battery or aC
power. this field will appear after you installed the CPu which support speed-
step technology.
adjust CPu FSB Frequency (mHz)
this item allows you to adjust the CPu FSB frequency.
adjusted CPu Frequency (mHz)
it shows the adjusted CPu frequency (FSB x Ratio). Read-only.
memoRy-Z
Press <enter> to enter the submenu.
dimm/2 memory SPd information
Press <enter> to enter the submenu, that displays the informations of in-
stalled memory.
advance dRam Configuration
Press <enter> to enter the submenu.
dRam timing mode
Selects whether dRam timing is controlled by the SPd (Serial Presence
detect) eePRom on the dRam module. Setting to [auto By SPd] enables
dRam timings and the following related items to be determined by BioS
based on the configurations on the SPd. Selecting [manual] allows users to
configure the dRam timings and the following related items manually.
CaS Latency (CL)
When the dRam timing mode sets to [manual], the field is adjustable. this
controls the CaS latency, which determines the timing delay (in clock cycles)
before SdRam starts a read command after receiving it.
tRCd
When the dRam timing mode sets to [manual], the field is adjustable. When
dRam is refreshed, both rows and columns are addressed separately. this
setup item allows you to determine the timing of the transition from RaS (row
address strobe) to CaS (column address strobe). the less the clock cycles,
the faster the dRam performance.
tRP
When the dRam timing mode sets to [manual], the field is adjustable. this
item controls the number of cycles for Row address Strobe (RaS) to be al-
lowed to precharge. if insufficient time is allowed for the RaS to accumulate
its charge before dRam refresh, refreshing may be incomplete and dRam
may fail to retain data. this item applies only when synchronous dRam is
installed in the system.
tRaS
When the dRam timing mode sets to [manual], the field is adjustable. this
24