Figure 7-15: Configuration - Netbeui - Linksys WPS54GU2 User Manual

Wireless-G PrintServer for USB 2.0
NetBEUI (Figure 7-15)
• Domain Name. Enter the name of the domain that you want the PrintServer associated with in the Domain
Name field. If you are unsure of the Domain Name, you can find it out by looking on any computer already on
the network. In Windows 98, right-click Network Neighborhood and select Properties. Under the
Identification tab, there will be listed that computer's name, and the Domain to which it is connected. For
Windows Me, 2000, or XP, right-click My Network Places. In Windows Me, choose Properties from the
menu that appears. In Windows 2000 or XP, choose Properties from the menu that appears. Then, right-
click Local Area Connection and choose Properties. The Domain name will appear. If you want the
PrintServer to be connected to that same Domain, enter that Domain name here. If no Domain name exists
there, you will use the Workgroup name from that window.
• Port Setting. You can specify the Response Time that you prefer for the PrintServer. This is the amount of
time (measured in seconds) that the PrintServer will wait for a response from the network before "timing
out." You also have the option to use this feature, Abort Print Job if Error. Selecting Yes here will terminate
the printing if there is an error of any kind. If you select No, print jobs that have errors will be sent to the
printer, but might not print properly.
Click the Get Defaults button if you want to cancel your changes and use the default settings.
When finished making your changes on this tab, click the OK button to save these changes, or click the
Cancel button to undo your changes. For more information, click the Help button.
Chapter 7: Bi-Admin Management
The Bi-Admin Management Utility

Figure 7-15: Configuration - NetBEUI

36