Hitachi 43FWX20B Operating Manual page 52

Auto Channel Scan
Setup
Set The Channels
Ant A
Source
Antenna
Auto Channel Scan
Move
SEL
Setup
Set The Channels
Ant A
Auto Channel Scan
Scanning Channel Number: 66
Cancel
SEL
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to erase additional channels (see page 42).
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP ( ) or DOWN ( ).
Cable(1) Cable(2)
Start
Select
Cancel
Setup
Set The Channels
Ant A
Source
Antenna
CURSOR
Auto Channel Scan
Move Select
SEL
SELECT
52
SETUP
Cable(1) Cable(2)
Start