Remote Control Battery Installation And Replacement - Hitachi 43FWX20B Operating Manual

Check to make sure you have the following accessories before disposing of the packing material.
PART NAME
CLU-4321UG
REMOTE CONTROL
43" TELEVISION
STAND
SP-43W
(Not included,
order separately)
OPTIONAL
43" TELEVISION
STAND
SP-43WS
(Not included,
order separately)
OPTIONAL
CAUTION: Television stand models SP-43W and SP-43WS are designed for use with a 43 inch or smaller television set.
Use of a smaller stand, a non Hitachi recommended stand or a generic stand may result in instability, causing
possible injury.
1. Remote Control Unit CLU-4321UG (Part No. HL01831).
2. Two "AA" size, 1.5V batteries (For Remote Control Unit).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs
and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
PART NO.
HL01831
TV
SWAP PIP MODE
PIP
VIDEO
MUTE
VOL
1
4
7
ANT
VID1 VID2
REC
VID5
CLU-4321UG
H530052
H530053
BOTTOM VIEW
Lift up on tab to
remove back cover.
4
ILLUSTRATION
POWER
CBL/SAT DVD/VCR
FREEZE
PIP CH
MENU
SELECT
LAST CH
EXIT
CH
2 3
5 6
8 9
0
INFO
VID3 VID4
ASPECT VIRTUAL HD
1.
ACCESSORIES
2.