Connecting A Stereo Vcr Or Stereo Laserdisc Player - Hitachi 43GX10B Operating Manual

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER

1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after
approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
Optional, see tips
on page 12
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be
abnormal if the connection is loose.
If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output.
(INPUT 1 in example on page 11) Refer to your VCR operating guide for more information on line input-output
connections.
S- VH S V L R
O U TPU T
BAC K O F VC R
H I TAC H I M odel
or si m i l ar m odel
15
S-VIDEO
VIDEO
(MONO)/L
R
AUDIO
INPUT 1
TV INPUT
TERMINAL