Setting Up The Wireless-B Ethernet Bridge - Cisco Linksys WET11 Quick Installation Manual

Setting up the Wireless-B
2
Ethernet Bridge
A
Insert the Setup CD-ROM into
your PC's CD-ROM drive. The
Setup Utility should run
automatically, and the
Welcome screen should
appear. If it does not appear,
click the Start button and
choose Run. In the field that
appears, enter D:\setup.exe (if
"D" is the letter of your CD-ROM
drive).
B
Click Setup to begin the setup
process.
C
Make sure the Bridge is
correctly connected to your
wired network. Click Next.
D
The screen displays a list of
Wireless-B Ethernet Bridges on
your network, along with their
status information. Select the
Bridge you are currently
installing by clicking its name in
the Selection box. Click Yes.
E
The Password screen will
appear. In lowercase letters,
enter admin in the Password
field. Then click Enter.
A
C
D
E
3