Memorizing Channels; Picture Menu; Changing The Preset Picture Mode; Adjusting Picture Settings - Samsung 4+ Series User Manual

Basic Features

Memorizing channels

¦
O
MENUm → Channel → ENTERE
Air/Cable (Air / STD / HRC / IRC)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
✎
NOTE
x
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
Auto Program
Scans for all channels with active broadcast stations and
stores them in the TV's memory.
✎
If you want to stop Auto Programming, press the
ENTERE button.
Fine Tune
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
✎
Settings are applied to the channel your currently
watching.
✎
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the
channel number in the channel banner.
✎
To reset the fine-tuning, select Reset.
Color System (Auto / PAL-M / PAL-N /
NTSC)
Normally the TV can receive image and sound with good
quality when in the mode auto. This mode detects the signal
color system automatically. In case of some signal reception
with color unsatisfactory, select the Color System Mode to
PAL-M, PAL-N or NTSC.
12
English

Picture Menu

Changing the Preset Picture Mode

¦
O
MENUm → Picture → Mode → ENTERE
Mode
t
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal
environment.
■ Movie: Suitable for watching movies in
a dark room.

Adjusting Picture Settings

¦
O
MENUm → Picture → ENTERE
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to Cell
Light, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
x
Lowering picture brightness reduces power
consumption.

Economical Solutions

¦
O
MENUm → Picture → Eco Sensor → ENTERE
Eco Sensor (Off / On)
Eco Sensor detects surrounding light intensity using an
optical sensor and adjusts the screen's brightness.
■ Eco Sensor (Off / On): Turns the sensor off or on.
✎
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
■ Min Cell Light: Manually adjust the screen brightness
(0~10).
✎
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
P.MODE