Viewing The Menus; Memorizing The Channels - Samsung 450 User Manual

I . . . ·
V1
iewing the Menus
• With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Picture, Sound, Channel, Setup, Input.
2 Press the .. or " button to select one of the icons.
Then press the ENTER button to access the icon's sub-menu.
3 Press the EXIT button to exit.
~
It takes about one minute until the on-screen menu disappears.
1
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels. After the
available channels are memorized, use the CH
a
or CH
G
button to scan through the channels. This eliminates
the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel
Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1 Press the MENU button to display the menu.
Press the .. or " button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the .. or " button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Standard
Custom
Off
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the .. or " button to select Switch to Cable or Switch to Air, then press
the ENTER button.
Continued...
Tools
Anynet+(HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
Add to Favorite
~---==
_ _
----.-J