Page 1
MCU Pro MCU XT Pro Universal Control Surface Universal Control Surface Extender O W N E R ’ S M A N U A L MAIN EXTERNAL MIDI P O W ER POWER EXTERNAL UNIVERSAL CONTROL SURFACE PORT1 PORT 2...
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. Mackie Control Universal...
DAWs. Some of permissible limits could result in some hearing loss. To ensure these are included with the MCU Pro and others against potentially dangerous exposure to high sound pressure may be ordered from our parts department.
Note: The USB method is the preferred method 1. If using the USB method to connect the MCU because all of the MIDI ports on the MCU Pro are Pro to a computer, then the MCU Pro has available. If using MIDI cables to connect the...
Since it is unlikely that you will want the MCU Pro mounted perpindicular to the desktop, make sure the VESA mount is flexible enough so it may be properly adjusted for your working space.
32 faders with 32 V-Pots. USB Connection You may purchase short MIDI cables to keep the cabling neat and tidy when connecting the MCU XT Pros to the MCU Pro. Hookup 1: USB MCU Pro MCU XT Pro MCU XT Pro...
This button selects the corresponding channel Although the functions of the knobs and for channel-based editing or assignment buttons on the MCU Pro will vary depending on commands. which software application is being utilized, this section provides an overview of the control surface 3.
CONTROL TOUCH LATCH CANCEL ENTER GROUP and refer to the documentation for the DAW application that describes how it operates with MCU Pro. MARKER NUDGE CYCLE DROP REPLACE CLICK SOLO 12. TRANSPORT...
These are provided for connecting a momentary This is the USB connection between the MCU Pro footswitch to the MCU Pro that may be used to and the host computer. Use the USB cable provided control functions such as Play/Stop, Rec Ready, to connect this port to a USB port on the computer.
Appendix A: Key Commands Engaging certain switches on the MCU Pro and MCU XT Pro during power up perform a variety of configuration tasks. See the table below for more information. Key Command Function More Information Mode Change Select 1 and 2...
It’s easy to do; just follow the instructions listed below. Note that this process is identical for both the MCU Pro and MCU XT Pro. To Align the Faders: 1.
SAW Studio User Manual Note: All DAWs listed above work with both the MCU Pro and MCU XT Pro except Adobe Audition which is only compatible with MCU Pro. Disclaimer: We are always striving to keep this information updated as much as possible. However, sometimes changes may occur at any time without notice.
Appendix D: Service Information Repair If you think your Mackie product has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the For warranty service, refer to the warranty Support section of our website information on page 16.
Dimensions 16.5 in / 419 mm MAIN EXTERNAL UNIVERSAL CONTROL SURFACE PORT1 PORT 2 PORT 3 PORT 4 USER SWITCH CONTROL POWER (INTERNAL) = MCU 4.4 in / EXTERNAL POWER 113 mm 7.5V 3.0A-4.0A WEIGHT VPOT ASSIGN DISPLAY 16.8 lb UNIVERSAL CONTROL SURFACE NAME SMPTE...
The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”). For products purchased outside the U.S. or Canada, please visit www.mackie.com/warranty to find contact information for your local distributor, and information on any warranty coverage provided by the distributor in your local market.
Page 17
16220 Wood-Red Road NE • Woodinville, WA 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and South America: 425.487.4333 Middle East and Africa: 31.20.654.4000 Fax: 425.487.4337 • www.mackie.com E-mail: sales@mackie.com...