Step 11: Enjoy Your Lightspeakers - Klipsch Light Speaker Owner's Manual

B) If you are attaching only one source it may be
attached to either input but may be convenient to
attach to source one.
1) You may use either the mini-plug or the RCA inputs on
either source but only one input may be used at a time.
The remote control and the transmitter are controlled
in exactly the same manner. When you push a button
on the remote contol the small LED next to the button
will light up and remain lit until you push another button
affecting either that zone or that source. The LEDs that
are lit will tell what action the remote or transmitter is
currently set to control.

Step 11: Enjoy your LightSpeakers

24
Tech Support: 1-800-KLIPSCH
CAUTION!
Do not use the speaker outputs as
this can damage the transmitter!
!
®