Summary of Contents for Klipsch Reference Series RB-5
Page 1
8900 Keystone Crossing, Suite 1220 Indianapolis, Indiana 46240 1 . 800 . KLIPSCH • www.klipsch.com Make sure you return your warranty card so that we may keep you up-to-date on new Klipsch products and promo- tions. As always, if you have any questions, contact your local authorized Klipsch dealer.
Page 2
RB-5, RC-3, RS-3, RF-3, RP-3, RP-5 O w n e r ’s Manual & Wa rranty...
Page 3
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center. AVIS: Risque de choc electricque, ne pas ouvrir.
Page 4
Have you purchased Klipsch products before? If yes, what products? Product Name(s): When do you hope to purchase additional loudspeakers? How likely are you to consider Klipsch products for your upcoming purchases? Somewhat likely Doubtful If doubtful, why? Don’t carry product I’m looking for...
Page 5
To obtain warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions.
Page 6
15. Dangerous Entry. Care should be taken that no foreign objects or liquids fall or are spilled inside the device. 16. Damage Requiring Service. The device should be serviced by a Klipsch authorized service center when: -The plug or power supply cord has been damaged.
Page 7
If this is your first Klipsch purchase, welcome to the fold; if this is an additional Klipsch purchase, we thank you for your loyalty. When it comes to the best in home entertainment, Klipsch is a sound choice.
90Hz @ 1% THD maximum Auto Power On: 2 second ON delay, 15 minute OFF delay Inputs: High level speaker terminals via binding posts; two line level terminals including a variable line input and a dedicated LFE input (non-filtered) via RCA phono jacks...
CAUTION! Since the Klipsch RP-3 and RP-5 have built-in electronics, do not place them near sources of heat or moisture. Take care to route the power cord so that it will not be cut, damaged or pinched.
LFE OUT (optional) This output is provided to feed the LFE signal to the other speaker if it is difficult or inconvenient to con- nect both directly to the LFE output on your electronics.
(if present). If the hum disappears, consult your Klipsch dealer for a ground isolator for the cable line. If this does not solve the problem, contact your Klipsch dealer for further advise.
five to seven feet from the floor to the base of the speaker is recommended. Your Klipsch surround speaker can be wall mounted by using the supplied keyhole brackets on the rear of the cabinet. These two brackets are vertically oriented to attach to a pair of screws secured into a...