Troubleshooting - LG T500 User Manual

Troubleshooting

This chapter lists some problems you might encounter while
using your phone. Some problems require you to call your service
provider, but most are easy for you to correct yourself.
Message Possible causes
There is no USIM card in
USIM error the phone or it is inserted
incorrectly.
Signal weak
No network
Outside GSM network
connection
area
To change a security
code, you will need to
Codes do confirm the new code by
not match entering it again. The two
codes you have entered
do not match.
Function Not supported by Service
cannot be Provider, or registration
set required
Dialling error
Calls not
New USIM card inserted
available
Charge limit reached
30
Possible Solutions
Make sure the USIM card is
correctly inserted.
Move towards a window or
into an open area. Check the
Network Operator coverage
map.
The default code is [0000]. If
you forget the code, contact
your service provider.
Contact your Service Provider.
New network not authorised.
Check for new restrictions.
Contact Service Provider or
reset limit with PIN 2.