Battery And Charging - iRobot Braava 300 series Owner's Manual

Battery and Charging

Run Time
Charge Time
Charging
• Stand Braava on its end to access the charging port.
• Plug the adapter into a standard electrical outlet and into Braava's
charging port.
• Charge Braava until a solid blue light appears on the power button*.
• It may take Braava a few charging cycles to reach its full capacity.
Charging Port
Charging Port
TIP:
Braava 380t
See Cradle instructions for details (pg.11).
CAUTION: Do not charge Braava while the Pro-Clean reservoir pad
or any wet cloth is attached. Charge using a standard 120V outlet only.
Only use the included adapter to charge Braava. Always disconnect
Braava from the adapter before cleaning.
Braava 300 Series Owner's Manual
10
Mode
Sweep
Mop
N/A
can also be charged with the Braava Turbo Charge Cradle.
Braava 320
up to 3 hrs
2 hrs
10 hrs
* The blue light indicates on average that the
battery has charged to 80% of its capacity.
Charging time and run time can be
affected by operating temperature,
floor type and other conditions.
Braava 380t
up to 4 hrs
2.5 hrs
2 hrs