NordicTrack NTEL00607.0 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
Remove the shipping bracket (not shown)
inserted into the underside of the Frame (1).
Then, remove the two M10 x 120mm Patch
Screws (58) and the shipping bracket (not
shown) attached to the front of the Frame.
Discard the shipping brackets. Do not discard
the two M10 x 120mm Patch Screws.
Orient the Stabilizer (49) with the Wheels (8) in
the position shown. While a second person tips
the Frame (1) backward, attach the Stabilizer to
the Frame with the two M10 x 120mm Patch
Screws (58).
2. Identify the Right Handlebar (36), which is
marked with an "R" sticker, and orient it as
shown. Attach the Right Handlebar to the Frame
(1) with the Upper Body Endcap (34) and three
M6 x 18mm Patch Screws (57).
Repeat this step to attach the Left Handlebar
(22).
1
8
1
2
22
6
58
49
1
36
34
8
57