Kodak Sidekick 1400u User Manual page 11

Installing software
2-2
1. Turn on the host PC. You must log in as an Administrator.
2. Insert the Sidekick Resource Installation CD in the CD-ROM drive
and follow the installation steps.
3. After the software installation, press the Power switch to turn the
scanner on.
The LED will light and Windows will detect the scanner and launch
the Found New Hardware dialog box.
4. Follow the Windows New Hardware detect wizard.
NOTE: A compatibility message may be displayed. Click Continue
Anyway.
5. Insert the Sidekick Resource Installation CD into the host PC.
NOTE: The drive letter will vary depending on where your
computer CD-ROM drive is located.
6. Click OK. If the files cannot be found, you will be prompted to
browse to locate the file.
NOTE: If Windows does not automatically install the Sidekick
device drivers then insert the Installation CD and Browse
to the MiniDriver folder on the CD.
7. When the installation is completed, click Finish.
8. Restart the host PC.
LED
A-61676 June 2010