Table of Contents
Advertisement
• If memory is available on your transceiver for recording, "I am not available.
Leave your Message." will be sent to the caller. The caller can then leave a
recorded message on your transceiver which you can later recall and listen to.
When a message is stored on your transceiver, "MSG RCVD" appears on the
display.
• If no memory is available on your transceiver for recording, "I am not available."
will be sent to the caller and "MEMORY FULL" appears on the display.
■ p
lAybAcK
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter Playback mode.
• If the last action on your transceiver was to auto record your conversation,
"STORE?" will appear on the display, otherwise a recording channel with the time
of the recording will appear.
• To store the conversation record in the next available recording channel, press
the ■ key. To clear the conversation, press the A or DTMF # key. To skip to
the stored recording channels, press the S or DT
seconds, press the <B key. To skip ahead 5 seconds, press the C> key.
2 Press the
• "RM" represents automated reply messages.
• "AR" represents conversation records.
• "VM" represents voice memos.
3 The transceiver will announce the channel, then the recording will
automatically play back.
• When the entire recording has been played, "END OF MSG" (end of message) is
displayed.
• To delete the selected recording, press the A or DTMF # key. To clear all the
recorded data, press and hold the A or DTMF # key. A confirmation message
will appear on the display; press the S or DTMF
or the A or DTMF # key to cancel.
v
g
oice
uide
When pressing a transceiver key, an audio voice will announce the key function.
If programmed by your dealer, an audio voice will also announce the selected call
address, when changing call addresses.
24
and
keys to select the channel which you want to play back.
MF
ke
y. To skip back 5
key to delete the recording(s)
Advertisement
Table of Contents
