Dome Presets; To Store Presets; To Recall Presets - Honeywell VideoBloX Quick Start Manual

Controlling the Dome

Dome Presets

To Store Presets

To Recall Presets

Rev 1.0
The Dome can be set up for Preset views.
1. Move the dome to the selected view with the joystick.
2. Press the Alt and the Preset/Save key simultaneously.
3. Enter a number for the preset.
4. Press the Enter key.
5. Repeat for all the presets.
1. Press the Preset/Save key.
2. Enter a number corresponding to the required preset.
3. Press the Enter key.
The dome moves to the programmed preset position.
24 Document 900.0840
09/06