Set Up And Operating Instructions; Tool Set Up; Set Up - Chicago Electric 66755 Set Up And Operating Instructions Manual

seT uP and oPeraTing
insTrucTions
read the enTire iMPorTanT
saFeTY inForMaTion
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.

Tool set up

FroM accidenTaL
oPeraTion:
Turn the Power switch of the tool
to its "oFF" position and remove
the battery Pack (1)from the tool
before performing any
inspection, maintenance, or
cleaning procedures.
work Piece and work area set up
1. Designate a work area that is clean and
well-lit. The work area must not allow
access by children or pets to prevent
injury and distraction.
2. Route the charger cord for the Charger/
Battery Socket assembly along a safe
route to reach the charger location with-
out creating a tripping hazard or expos-
ing the cord to possible damage.
3. Secure loose workpieces using a vise or
clamps (not included) to prevent move-
ment while working.
4. Verify that there are no utility lines, for-
eign objects or other hazardous objects
nearby that will present a hazard while
working.
5. Check to make sure there is enough
space under and behind the workpiece
for the Saw Blade when using the Re-
SKU 66755
To PreVenT
serious injurY
For technical questions, please call 1-800-444-3353.
ciprocating Saw or the Circular Saw.
Ensure you will not be cutting through
any electrical wires, pipes, or your work-
bench.
Page 13