Chicago Electric 66755 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Saw
  5. 66755
  6. Set up and operating instructions manual

Chicago Electric 66755 Set Up And Operating Instructions Manual

Power tools set
Hide thumbs
Table of Contents

Advertisement

Quick Links

seT uP and oPeraTing insTrucTions

distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe THis ManuaL.
©
Copyright
2009 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 09l
Power TooL seT
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
66755
®
.

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 66755

Summary of Contents for Chicago Electric 66755

  • Page 1: Set Up And Operating Instructions

    Power TooL seT Model 66755 seT uP and oPeraTing insTrucTions ® distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.

  • Page 2: Table Of Contents

    LiMiTed 90 daY warranTY ..30 bLade ........... 14 seT THe cuTTing angLe .... 14 seT THe cuTTing dePTH .... 15 using THe riP Fence ....15 oPeraTing THe circuLar saw 15 Page 2 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 3: Important Safety Information

    SKU 66755 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Eye protection must be be performed. Use of the power tool for ANSI-approved and breathing protection Page 4 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 5: Circular Saw Safety Warnings

    The blade washers and bolt were specially designed for your saw, for optimum performance and safe- SKU 66755 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6 (a7) spring on the circular may occur. Investigate and take cor- saw. if the guard and the spring are not operating properly, they must Page 6 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 7: Drill Safety Warnings

    Contact with a ″live″ wire will make ex- posed metal parts of the tool ″live″ and shock the operator. SKU 66755 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: Additional Safety Warnings

    This product is not a toy. Keep it out of situations that may occur. It must be reach of children. Page 8 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 9: Vibration Safety

    Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. Tools marked “Double Insulated” do not require grounding. They have a special SKU 66755 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Symbology

    Extension cords must not be used with this item’s charger. symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) Page 10 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 11: Specifications

    Assembly Diagram near the end of Input Power 120V / 60 Hz this manual. Output Power 22VDC (max.) / 400mA LED Indicator Red when charging; Light Green when fully charged, Charge Time 3 - 5 hours SKU 66755 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: The Battery Packs

    Battery Pack is charging. a qualified service technician. The initial charge time is 3-5 hours, after which the Battery Pack should be re- Page 12 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 13: Set Up And Operating Instructions

    Verify that there are no utility lines, for- eign objects or other hazardous objects nearby that will present a hazard while working. Check to make sure there is enough space under and behind the workpiece for the Saw Blade when using the Re- SKU 66755 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Circular Saw Set Up And Operating Instructions

    Angle Plate as a guide. Tighten the Angle Adjustment Knob Rip Fence Knob (A42) (A38) to hold the Base Plate (A36) at the Depth Adjustment Knob (A46) desired angle. Figure a1 Page 14 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 15: Set The Cutting Depth

    Slide the arm of the Rip Fence through the mounting slots (not shown) at the front of the Base Plate (A36). Adjust the Rip Fence to the desired cut- ting width. Tighten the Rip Fence Knob (A42). SKU 66755 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Reciprocating Saw Set Up And Operating Instructions

    Clean, then store the Saw indoors and out of children’s reach. operating the reciprocating saw With the Saw Blade installed, squeeze, then release the Trigger (B19-1) to make sure it is locked. It should not move. Page 16 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 17: Plunge Cutting

    17 of this manual. bit into the drill between the Chuck Jaws. Tighten the Chuck until the bit is held securely in place, centered between the Chuck Jaws. SKU 66755 For technical questions, please call 1-800-444-3353. Page 17...

  • Page 18: Operating The Drill/Driver

    Fix the torque setting low enough to al- low a safety margin. operating the drill/driver Insert the fully charged Battery Pack (1) into the base of the Drill/Driver, making sure that it clicks into place securely. Page 18 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 19: Work Light Set Up And Operating Instructions

    Press the Power Switch (D17) to turn the light on. When finished using the Work Light, press the Power Button again to turn the light off. Disconnect the Battery Pack after use. Clean, then store the tool indoors out of children’s reach. SKU 66755 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Maintenance And Servicing

    Store indoors, out of reach of children. Page 20 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 21: Troubleshooting

    Use a tool with greater torque. as a screwdriver, Wrong size bit. Use correct size bit. unable to remove screw Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. SKU 66755 For technical questions, please call 1-800-444-3353. Page 21...
  • Page 22 RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 22 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 23: Parts Lists And Assembly Diagrams

    ParTs LisTs and asseMbLY diagraMs accessory Parts List and diagram Part description Battery Pack Charger Battery Socket SKU 66755 For technical questions, please call 1-800-444-3353. Page 23...

  • Page 24: Parts List A - Circular Saw

    A19-6 Connecting Wire 3 Angle Adjustment Knob Screw Impacting Spring Screw Hex Nut Screw Bolt Rear Cover Rip Fence Knob Right Motor Housing Phillips Head Screw Motor Assembly Hex Wrench A25-1 Motor Page 24 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 25: Assembly Diagram A - Circular Saw

    - circular saw note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 66755 For technical questions, please call 1-800-444-3353. Page 25...

  • Page 26: Parts List And Diagram B - Reciprocating Saw

    B19-4 Connecting Wire 1 Left Motor Housing B19-5 Connecting Wire 2 Left Motor Housing note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 26 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 27: Parts List And Diagram C - Drill

    Connecting Wire 1 Forward/Lock/Reverse Button Connecting Wire 3 Light Switch Connecting Wire 4 note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 66755 For technical questions, please call 1-800-444-3353. Page 27...

  • Page 28: Parts List D - Flashlight

    Left Housing Right Front Cover Right Lamp Holder O-Ring Right Housing Power Switch Spring Screw Lamp Holder Orientation Orientation Pin Spring Lamp Shade Lens Reflector Left Lamp Holder Left Front Cover Page 28 For technical questions, please call 1-800-444-3353. SKU 66755...

  • Page 29: Assembly Diagram D - Flashlight

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 66755 For technical questions, please call 1-800-444-3353. Page 29...

  • Page 30: Limited 90 Day Warranty

    THIS Camarillo, CA 93011 • (800) 444-3353 WARRANTY IS ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IM- PLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. Page 30 For technical questions, please call 1-800-444-3353. SKU 66755...

Table of Contents