Installing The Edge - Garmin Edge 200 Owner's Manual

NOTE: To connect the Edge to your
computer using the USB cable, see
page 8.
1. Plug the AC charger into a standard
wall outlet.
2. Pull up the weather cap from the
mini-USB port
3. Plug the small end of the AC
charger into the mini-USB port.
4. Charge the Edge for at least three
hours before you begin using it.
A fully charged battery can run for
up to 14 hours before it must be
recharged.
Edge 200 Owner's Manual
.
➊
➊

installing the Edge

For the best GPS reception, position
the bike mount so the front of the Edge
is oriented toward the sky. You can
install the bike mount on the stem or
the handlebars.
1. Select a suitable and secure location
to mount the Edge where it does not
interfere with safe operation of your
bike.
2. Place the rubber disk
of the bike mount
The rubber tabs align with the back
of the bike mount so it stays in
place.
on the back
➊
.
➋
➍
➋
➊
➌
3