Using The Tv's Features; Switching Between Two Channels; Programming Your Favorite Channels - Hitachi 50HDA39 Operating Manual

Using the TV's features

Switching between two channels

You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Press TV to select the TV mode.
2. Select the first channel you want to view.
3. Select a second channel using the Channel Number buttons
(0-9, –.)
4. Press LAST CH. The previous channel will be displayed.
Each time you press LAST CH, the TV will switch back and forth
between the two channels.

Programming your favorite channels

You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
You can still use CH ▲/▼ to scan through all the channels you
programmed in the TV's memory or the Channel Numbers to
directly tune a channel.
To program your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to program.
3. Press MENU, then press
menu.
4. Press ▲ or ▼ to highlight FAVORITE CH.
5. Press to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
6. Press or
7. Press EXIT to return to normal viewing.
8. Repeat steps 1-7 for up to 12 channel.
To select your favorite channels:
Press the FAV ▲ / ▼ buttons on the remote control to select
yourfavorite channels.
The FAV ▲ / ▼ buttons will not work until you have
programmed your favorite channels.
To clear your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to clear.
3. Press MENU, then press
menu.
4. Press ▲ or ▼ to highlight FAVORITE CH.
5. Press to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
6. Press or
7. Press ENTER until "0" replaces the channel number you want to
erase.
8. Press EXIT to return to normal viewing.
9. Repeat steps 1-8 for the other channels.
24
3X80801A_En_p18-25 24
or to display the CUSTOMIZE
to highlight SET and press ENTER.
or to display the CUSTOMIZE
to highlight CLEAR.
Video Audio Setup Customize
CUSTOMIZE
ON TIMER OFF
FAVORITE CH
CH LABEL
SET THE INPUT
SELECT ADJUST
Video Audio Setup Customize
FAV O R I T E C H : C H
S E T / C L E A R A I R C A B L E
0 0
0 0
0 0
0 0
R E T U R N
S E L E C T A D J U S T
E N T E R : S E T
Video Audio Setup Customize
FAVORITE CH : CH
SET / CLEAR AIR CABLE
2 0
0 0
0 0
0 0
RETURN
SELECT ADJUST
ENTER:CLEAR
7/11/06, 8:07 PM
Locks
Locks
2
0
0
0
0
Locks
2
0
0
0
0