Getting Started - Vax S10 Series User Manual

CAUTION: Do not use hot or boiling water to fill water compartment. Do not open the water tank lid when using the
steamer. Your steamer is pressurised, do not completely remove the lid when tank is hot. Fill tank only when cool.
IMPORTANT: After use, switch off the machine, compress the steam trigger to release all remaining steam. Allow
machine to cool for a minimum of 30 minutes before refilling or storing.
Operating your steam cleaner
To remove lid push down and
twist anti-clockwise.
Ensure lid is securely fastened
by pushing down and twisting in
a clockwise direction.
Within 6 minutes your steamer
will heat up and will be ready
for use.
Orange
LED = water heating
Orange Green
LED + LED =
steam ready after 6 minutes
vax.co.uk
Attach the hose to the unit.
When removing the hose, ensure
the machine is switched off and
fully cooled.
Release steam handle
safety latch.

Getting Started

Fill measuring jug to 750ml.
Ensure steam handle safety
latch is on before heating.
Press steam trigger to
release steam.
Insert funnel into the water tank
to make filling the tank easier. Fill
the tank to a maximum 750ml and
leave space at the top of tank.
Plug in steamer at the mains, and
press ON/OFF button to turn on.
Rotate variable steam dial to
adjust steam pressure.
4