Lmc-1 Remote - Emotiva LMC-1 Manual

LMC-1 Remote

The LMC-1 remote control is a full featured, dedicated remote control that offers many discrete
buttons for DIRECT ACCESS to most of the critical LMC-1 controls. When used in conjunction with
the On Screen Display (OSD), there may be little need to ever touch the front panel of the LMC-1
again if you so choose.
Mute Button
Source Selection Buttons
These buttons select the various
source inputs of the LMC-1
OSD Button
This toggles the video input
selections for the current source
TEST Button
This button brings up the Noise
Test mode of Function Menu
DISPLAY Button
This button brings up the display
to show information such as
Dolby or DTS, the AM/FM
channel, etc.
Sound Confi gure Buttons
These buttons select the various
parameters for the sound
adjustments
As many home entertainment enthusiasts choose, you may elect to program the LMC-1 remote
into a "learning" type remote that is the single (Master) control for all of your home entertainment
components. In doing so, you can choose to omit certain setup functions if you wish so you do not
inadvertently enter into those functions during normal use with the master remote. A master remote
can also provide a unified turn on/off resource for all of the components in the system through the use
of a macro program sequence.
Power Button
Signal Processing Modes
These buttons select the signal processing
modes
STEREO Button
Press to select stereo or mono
INPUT MODE Button
This toggles the audio input selections
for the current source
AUTO TUNE Button
Press to search AM/FM channels
Menu and Program Buttons
These buttons select the various
menu functions and choices
Zone 2 Control Menu
Volume UP/DOWN
Tuner Buttons
These buttons (both the discrete
commands and the numeric buttons)
allow control of the AM/FM tuner
functions.
Page 15