Remote Control Battery Installation And Replacement - Hitachi 32HDT55 Operating Manual

Check to make sure you have the following accessories before disposing of the packing material.
REMOTE
CONTROL
SIMPLE REMOTE
CONTROL
PDP TV STAND (OPTIONAL)
32" (SPD32 P#H520441)
42" (SPD42 P#H520442)
11.
CAUTION: 1. The plasma display wall mount unit WM50 is for use only with Hitachi model 32HDT55, 42HDT55 and
50HDT55.
2. Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate
ventilation for the electronics or proper support for the front glass panel. This plasma television product is
designed for a maximum tilting angle of 45 degrees from vertical.
3. This SPD32 PDP stand for use only with Hitachi 32HDT55. Use with other apparatus is capable of resulting
in instability causing possible injury.
4. This SPD42 PDP stand for use only with Hitachi 42HDT55 Use with other apparatus is capable of resulting
in instability causing possible injury.
5. This 50STD3 stand for use only with Hitachi 50HDT55. Use with other apparatus is capable of resulting in
instability causing possible injury. See important marking located on bottom of stand.
1. Remote Control Unit CLU-5726TSI (P# HL01826).
2. Simple Remote Control Unit CLU-120S (P#HL01861).
3. Two "AA" size, 1.5V batteries (P# FQ00021).
4. Two "AAA" size, 1.5V batteries (P# FR00061).
5. Power Cord:
32"/42"
Plasma Monitor EV01841
AVC EV01841
6. Monitor Connection Cable (P#EW07883).
7. Two IR Mouse cables (P# EY01641).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
2. Insert two new "AA" and "AAA" size batteries for the remote control and
simple remote control respectively. When replacing old batteries, push
them towards the springs and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
"AA" BATTERIES POWER CORD
3.
"AAA"BATTERIES
4.
1.
SPEAKER ACCESSORIES
(42")
2.
50STD3 Table Top Stand
C
B
A
C «
B «
A «
C
B
A
C «
B «
A «
12.
50"
EV01861
EV01841
MONITOR
CONNECTION CABLE
5.
SPEAKER ACCESSORIES
(50")
8.
Subwoofer Cable Cleaning Cloth
13. 14.
8. Speaker Accessories (42" only) (P#GM01195).
9. Speaker Accessories (50" only) (P#GM01233).
10. Wall Mount Unit WM50 (Optional) (P#QX00563).
11. 32" Stand (SPD32 P# H520441) (Optional).
42" Stand (SPD42 P# H520442) (Optional).
12. 50" Table Top Stand (50STD3) (P#QD35632).
13. Sub Woofer Cable (P# VZ11701).
14. Cleaning Cloth (P#MS00803).
15. AVC Stand Accessories (P#QJ01081).
4
ACCESSORIES
IR MOUSE
CABLE
6. 7.
WALL MOUNT UNIT WM50
(OPTIONAL)
10.
9.
AVC Stand
Accessories
15.
BOTTOM VIEW
BOTTOM VIEW
(Remote Control)
(Simple Remote Control)
Lift up on tab to
remove back cover. Lift up on tab to
remove back cover.