Pci And Pci Express Cards; Removing The Card Retention Bracket; Replacing The Card Retention Bracket - Dell Studio XPS 7100 Service Manual

Back to Contents Page
PCI and PCI Express Cards
Dell™ Studio XPS™ 7100 Service Manual
Removing the Card Retention Bracket
Replacing the Card Retention Bracket
Removing PCI and PCI Express Cards
Replacing PCI and PCI Express Cards
Configuring Your Computer After Removing or Installing the PCI Express Card
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Card Retention Bracket
1. Follow the instructions in Before You
2. Remove the computer cover (see
3. Remove the screw that secures the card retention bracket.
4. Lift the card retention bracket and set it aside in a secure location.
1 screw 2 card retention bracket
Replacing the Card Retention Bracket
1. Follow the instructions in Before You
2. Replace the card retention bracket, ensuring that:
The guide clamp is aligned with the guide notch.
l
The top of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
l
3. Replace the screw that secures the card retention bracket.
4. Replace the computer cover (see
Begin.
Removing the Computer Cover).
Begin.
Replacing the Computer Cover).