Behringer Minimamp Gma 100 User Manual page 7

DC 9 V connector:
To supply mains power to the GMA100, plug a DC 9 V power adapter in this connector.
You can also power the GMA100 via a 9 V battery. For details, see 2.3 Battery
Compartment and Accessories.
2.3 Battery compartment and accessories
This section illustrates and provides descriptions of the setup accessories and battery
compartment.
Belt Clip: To hang the GMA100 from your belt or a wall fixture, use this hook.
Stand: When you set the GMA100 on a table or floor, pull out this stand. This stand
stabilizes the GMA100 and directs the amplified sound upward.
Battery compartment:
To supply battery power to the GMA100, do the following:
1. Remove the cover from the battery compartment.
Inside the battery compartment, you find the 9 V battery connector.
2. Connect a 9 V battery to the 9 V connector.
3. Replace the cover on the battery compartment.
Fig. 2.3: The rear of the GMA100
2. CONTROL ELEMENTS AND CONNECTORS
MINIAMP GMA100
7