Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A.
11
shown
B.
A
Sideburner Ignitor Wire
12
Inside of cart, insert rear tab (without hole) of heat shield into left slot on upper of lower back panel. Insert rear tabs
(without hole) of left and right grease tray rails into slots beneath grease tray opening in upper back panel, shown A. Attach
front tabs of heat shield under front brace and attach right and left rails under front brace with three #8x3/8" self-tapping
screws, shown B.
Left rail
Tank Heat Shield
24
A
Right rail
Grease tray opening
Place sideburner grate onto sideburner shelf
Sideburner grate
Tank Heat Shield
#8x3/8"
self-tapping screw
,
B
B
Right rail
Left rail