How To Secure Partition For 58Mm; Installing Battery - Citizen CMP-30 Series User Manual

3.3 How to secure partition for 58mm

(1) Move the movable partition to the left.
(2) Place the partition for 58mm so that the mounting hole for the
partition for 58mm aligns with the screw hole positioned on the
top of the case.
(3) Secure the partition for 58mm with a screw and align the movable
partition to the right.

3.4 Installing Battery

(1) Align battery hook as shown in the picture.
(2) Push the battery into the printer until it locks in place.
(3) To release or remove the battery, gently pull the release catch
towards the battery module and rotate the battery from the
printer.
NOTE
As the battery is not charged at the time of your purchase, charge the
battery fully prior to using the printer.
(Batteries can be charged in the printer or optional external cradle.)
Hook
24