Table of Contents
Advertisement
Event Bar
ning time of the unit.
1. Press the MENU button until "Fixture Time" is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
Firmware Version - Use this function to display the Firm-
ware version of the unit.
1. Press the MENU button until "Firmware Version" is displayed,
press ENTER.
2. The display will show the software version. Press MENU to
exit.
Fixture Reset - Use this function to reset the unit.
1. Tap the MENU button until "Fixture Reset" is displayed,
press ENTER.
2. The fixture will now reset.
Event Bar
With this function you can adjust and set the fixtures home
position.
1. Press the ENTER button for at least 5 seconds to enter into
offset mode.
2. Press the UP or DOWN buttons until "Offset" is displayed,
and press ENTER. The display will begin to flash.
3. Press the UP or DOWN buttons to adjust to your desired
home position. Once you have found your desired position
press the ENTER button to set and save, or press the MENU
button to return to return to offset functions without any
changes. If you do not press any buttons for 8 seconds the
fixture will return to the offset functions automatically.
©Elation Pr
fessionals® - www.elationlighting.com - Event Bar Instruction Manual Page 13
o
System Menu & Operation
Home Position Adjust
Event Bar
Universal DMX Control: This function allows you to use a
Elation® universal DMX-512 controller to create unique pro-
grams tailored to your individual needs.
1. The Event Bar has three DMX channel modes. To set the
DMX channel mode see page 10. See pages 15-16 for the
DMX modes & traits.
2. To control your fixture in DMX mode, follow the set-up pro-
cedures on pages 5-7 as well as the set-up specifications
that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture
traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 10 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a termina-
tor on the last fixture.
7. For help operating in DMX mode consult the manual includ-
ed with your DMX controller.
Event Bar
Stand by
Blackout the unit
1. Synchronous Strobe
2. Two light Strobe
Function
3. Sound Control
Mode
Strobe (LED OFF)
©Elation Pr
fessionals® - www.elationlighting.com - Event Bar Instruction Manual Page 14
o
Universal DMX Control
UC3 Control
Select Speed
Select
1.Fast
Show 1-11
2.Middle
3.Slow
Chase (LED ON)
LED blinking
Advertisement
Table of Contents
