Maintenance; Tool Lubrication; Carbon Brushes - Bosch RH228VC Operating/Safety Instructions Manual

Service
Preventive maintenance
performed by unauth-
orized personnel may result in misplacing
of internal wires and components which
could cause serious

TOOL LUBRICATION

CARBON BRUSHES

BEARINGS
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used.
NOTE:

Maintenance

hazard.
the power supply before cleaning or
performing any maintenance.
cleaning tools with compressed air.
plastic parts.
Accessories
RECOMMENDED SIZES OF ExTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Tool's
Ampere
Rating
Cleaning
To avoid accidents always
disconnect the tool from
Always wear safety goggles when
Certain cleaning agents
and solvents damage
Wire Sizes in mm
Cord Size in A.W.G.
Cord Length in Feet Cord Length in Meters
2