Resetting Menu Settings To Defaults (Reset); Turning Record Led On Or Off (Record Led); Changing Setting Of Demonstration - Hitachi DZ-GX5000A Instruction Manual

RESETTING MENU SETTINGS TO DEFAULTS (RESET)

You can restore menu settings to defaults (initial settings at the factory (p. 142)). (Note, however, that
the date/time will not be reset.)
1
Choose "Reset" on the
"Initial Setup" menu
screen, and then press
the A button.
The screen for verifying reset will appear.

TURNING RECORD LED ON OR OFF (RECORD LED)

You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select "On" or "Off", and
then press the A button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.

CHANGING SETTING OF DEMONSTRATION

1
Press the MENU
button, choose "Initial
Setup", "Demo Mode",
and then press the A
button.
2
Press the f or e button to choose the
desired option, and then press the A
button.
Auto: To start demonstration if the DVD
video camera/recorder is inactive for
approx. 3 minutes after it is turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
3
Press the MENU button again to exit setting.
2
I n i t i a l S e t u p
Be e p On
P o w e r S a v e Off
R e c o r d L E D On
L a n g u a g e English
Demo Mode Auto
Re s e t
ENTER RETURN
Note
To cancel resetting midway, choose "NO" on the screen
for verification in step 2 or press the C button.
Note
I n i t i a l S e t u p
• The Record LED setting will not appear in the on-
Be e p On On
O f f
P o w e r S a v e
R e c o r d L E D
L a n g u a g e
Demo Mode • The Record LED setting will be stored in memory
Re s e t
ENTER RETURN
• Specify "Record LED: Off" when recording a subject
• Even if "Record LED Off" is specified, the recording
Note
I n i t i a l S e t u p
• Pressing the C (STOP/EXIT) or DISC NAVIGATION
B e e p A u t o
Po w e r S a v e O f f
Re c o r d LED S t a r t
L a n g u a g e
Demo Mode
• If you choose "Auto", the demonstration will not start if
R e s e t
ENTER RETURN
• The demonstration function will not work when the
• While the demonstration is being given, the recording
If you are sure that you
wish to reset, use the
d button to choose
"YES", and then press
the A button.
The setting items have now been reset to
defaults.
:
:
screen information display.
even when the DVD video camera/recorder is turned
off.
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
indicator will light while the self-timer is counting
down.
:
button will exit demonstration.
a disc is loaded with the power switch set to "O" or
"N", or a card is loaded with the power switch set to
"P".
DVD video camera/recorder is connected to PC (DZ-
GX5080A only).
indicator will blink.
Re s e t
Re s e t ?
YES NO
ENTER
33