Table of Contents
Advertisement
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory (p. 152)). (Note, however, that
the date/time will not be reset.)
1
Choose "Reset" on the
"Initial Setup" menu
screen, and then press
the
button.
The screen for verifying reset will appear.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select "On" or "Off", and
then press the
button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
CHANGING SETTING OF DEMONSTRATION
Choose the desired option
using the screen on the
right, and then press the
button.
Auto: To start demonstration if the DVD
video camera/recorder connected to
AC adapter/charger is inactive for
approx. 10 minutes or more after it is
turned on.
Off:
To set demonstration to off.
Start:
To start demonstration immediately.
36
2
If you are sure that you
I n i t i a l S e t u p
wish to reset, use the
Be e p
On
P o w e r S a v e
Off
R e c o r d L E D
On
L a n g u a g e
English
Demo Mode
Auto
"YES", and then press
Re s e t
ENTER
RETURN
the
The setting items have now been reset to
defaults.
:
Note
To cancel resetting midway, choose "NO" on the screen
for verification in step 2 or press the
:
Note
I n i t i a l S e t u p
• The Record LED setting will not appear in the on-
Be e p
On
On
P o w e r S a v e
O f f
screen information display.
R e c o r d L E D
L a n g u a g e
• The Record LED setting will be stored in memory
Demo Mode
Re s e t
even when the DVD video camera/recorder is turned
ENTER
RETURN
off.
• Specify "Record LED: Off" when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
• Even if "Record LED: Off" is specified, the recording
indicator will light while the self-timer is counting
down.
:
Note
I n i t i a l S e t u p
B e e p
A u t o
• If "Auto" is specified, the demonstration will not start if
Po w e r S a v e
O f f
Re c o r d LED
S t a r t
a battery is connected.
L a n g u a g e
Demo Mode
• Pressing the
R e s e t
ENTER
RETURN
button will exit demonstration.
• If "Auto" is specified, the demonstration will not start
when the power switch on this DVD video camera/
recorder is set to "DVD" and a DVD is loaded, or when
the power switch is set to "SD" and a card is loaded.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC.
• While the demonstration is being given, the recording
indicator will blink.
Re s e t
button to choose
ENTER
button.
(STOP/EXIT) or DISC NAVIGATION
Re s e t ?
YES
NO
button.
Advertisement
Table of Contents
