Hitachi DZ-GX5000A Instruction Manual page 112

[When using Macintosh]
1
Turn the Macintosh on, and insert the
provided CD-ROM into the CD-ROM drive of
Macintosh.
2
Double-click the DVDCAM5000 icon
displayed on desktop.
3
Double-click the icon of "ImageMixer 3 for
DVDCAM.pkg" displayed on screen.
The installer will start: Click "Continue".
The "Read Me" screen will appear: Click
"Continue".
4
Checking license agreement:
The license agreement screen will appear.
Set the language to be used when installing
the software, and then carefully read the
license agreement: If you agree with the
contents, choose "Continue". If you accept
the license agreement, click "I agree".
* With the provided software for Macintosh, the
language used with OS will automatically be
installed.
112
Setting language
when installing
Click
5
Choose the installation destination and type
of installation, and click "Continue". Then
click "Install".
Follow the instructions on screen for
operation: Installation will start.
6
After installation is finished, the screen for
exit will appear: Click "Close".
The screen for installation will close and
installation will be complete: Remove the
CD-ROM.
:
Note
• You must have the administrator authority of the PC
before installing software.