Operation - Hitachi VM-H835LA Instruction Manual

Simple Programmable Edit (Edit remote control is optional accessory)
Gold Star
PHILIPS
RCA
Zenith
Magnavox
Note: The remote control code is held in memory until it is changed or the batteries are
replaced.
Note: Point the remote control straight at the VCR's infrared receiver for operation.
Note: Use the remote control indoors. When the infrared receivers of the VCR and
camcorder are exposed to direct sunlight or strong artificial light, the remote control may
not operate correctly.
Note: The remote control cannot be operated if there is an obstacle between the remote
control and infrared receiver. Especially, be careful of this during dubbing.
Note: When the edit remote control is connected to the camcorder, the buttons marked * in
the figure above perform the same operations as those of the other remote control
provided.

Operation

You can select up to four different scenes or segments to be copied at one time.
Note: If sunlight or strong artificial light strikes the camcorder's infrared receiver, the editing
operation may not be possible.
1. Connect the edit remote control to the camcorder, and then connect the AV output
cable as illustrated above. 2. Insert a recorded tape into the camcorder.
3. Set the CAM/OFF/VIDEO switch of the camcorder to VIDEO.
Turn the recording VCR on and select line input.
4. Press the PROGRAM button of the remote control. The program display appears in
the viewfinder or LCD monitor.
DISPLAY
COUNTER RESET
TITLE ON/OFF
58