Alesis DM8 Operator's Manual page 17

XOver Delay: This delay has a stereo
effect.
field.
PingPong: This delay has a stereo effect,
but instead of echoing in both lft and right
channels
alternates between them.
c. COMP (compression)
Type: The kind of compression applied. To disable
the dynamic processor on the Kit, select "OFF."
Compress (compression): The compression ratio
applied to the signal from the Kit.
Out Level (output level): The output level of the
compressor. This is parameter is useful for boosting
the Kit's signal if its volume has decreased due to the
compression.
d. EQ (equalization)
LF Gain (low-frequency gain): The amount of boost
or cut of the low frequency band (as determined by
the LF Freq setting).
LF Freq (low frequency): The frequency the LF Gain
will boost or cut.
HF Gain (high-frequency gain): The amount of boost
or cut of the high frequency band (as determined by
the HF Freq setting).
HF Freq (high frequency): The frequency the HF Gain will boost or cut.
Damp (damping): The amount of low- and high-frequency dampening of the
echo. At negative values, the sound of the echo gets progressively duller. At
positive values, the sound of the echo gets progressively thinner.
Level: The volume level of the delayed signal.
The echo pans around the stereo
LDly / RDly (left/right delay): The
speed of the delay/echo. This can be
set differently for the left and right
channels to create an even wider,
more varied sound.
Feedback: How much of the echo will be routed back into the processor again,
which creates a longer-lasting, intensified echo effect.
Damp (damping): The amount of low- and high-frequency dampening of the
echo. At negative values, the sound of the echo gets progressively duller. At
positive values, the sound of the echo gets progressively thinner.
Level: The volume level of the delayed signal.
simultaneously,
Delay: The speed of the delay/echo.
Feedback: How much of the echo will
be routed back into the processor
again, which creates a longer-lasting,
intensified echo effect.
Damp (damping): The amount of low- and high-frequency dampening of the
echo. At negative values, the sound of the echo gets progressively duller. At
positive values, the sound of the echo gets progressively thinner.
Level: The volume level of the delayed signal.
the echo
17