Table of Contents
Advertisement
Advanced Techniques
Note: EIS may not function if you use a wide or teleconverter lens.
Note: It is recommended that you do not use the EIS function when using a tripod. The sensor would detect
vibrations from the tripod in which case the picture would be blurred.
B.LIGHT LOCK or UNLOCK
The camcorder contains an auto iris that adjusts the lens aperture depending on the available light, widening it
during low light conditions and narrowing it when bright light is available. When the camcorder is turned off the iris
fully closes.
When you are filming a subject in front of a brightly lit background, press the B.LIGHT button and it corrects the
lighting on the tape.
LOCK: Specify LOCK when you are going to record objects in front of a brightly lit background for a long time.
When the B.LIGHT button is pressed with LOCK specified, the
corrected. To release backlighting (exposure) correction, press the B.LIGHT button again.
UNLOCK: The background is corrected only when you press the B.LIGHT button and hold it.
16X9 ON or OFF
ON: The picture format (aspect ratio) is changed from 4:3 (the picture format of an ordinary TV set) to 16X9.
When the 16X9 feature is switched on, the top and bottom of the picture are faded to black and 16X9 is displayed
on the LCD monitor.
OFF: 16X9 feature is switched off.
LCD ON or OFF
ON: The picture is displayed on the LCD monitor.
OFF: The LCD monitor is switched off. Specify OFF when you view playback pictures on your TV, not using the
LCD monitor, to save battery power.
Note: When a recording is made with the LCD monitor switched off, the power indicator lights in orange.
DISPLAY LCD, LCD/LINE, SEARCH or OFF
LCD: The information on the tape remaining, time counter, etc. is displayed on the LCD monitor.
LCD/LINE: M is displayed beside the time counter ("Memory Feature", p.46). When LCD/LINE is specified, you
can view the information of the memory displayed on the LCD monitor, superimposed on the playback picture on
the connected TV.
SEARCH: The camcorder searches for the start and end positions of recordings you made last on a specific day
("Date Search", p.43).
- 34 -
mark appears and the lighting on the tape is
Advertisement
Table of Contents
