Playing Back Your Recording On Your Tv - Hitachi VM-H100LA Instruction Manual

Basic Techniques
Using Forward and Reverse Search
When looking for a particular point in your videotape use the fast forward
spot quickly.
• Press fast forward during playback to play the tape forward at approximately 9 times normal speed. Press
play to return to normal playback.
• Press rewind during playback to play the tape backwards at approximately 7 times normal speed. Press play
to return to normal playback.
Note: When you engage fast forward
normal during search mode.

Playing Back Your Recording on Your TV

Depending on the setup of your video equipment, you connect the camcorder in one of the 3 methods explained
below.
Note: The letters and symbols are displayed on the LCD monitor in color, but they are in black-and-white on
the TV screen.
Note: Decrease the sound volume of the camcorder when you play back a recording by connecting the
camcorder to your TV. If the volume of the camcorder is set to maximum, the played back picture may be
distorted.
Connecting to a Television with a VCR Attached
1. Connect the provided AV stereo output cable to the AUDIO IN and VIDEO IN jacks of your VCR. Connect
either the right or left audio plug into your VCR if it has only one AUDIO IN jack.
Note: Some VCRs have an S-VIDEO IN jack. Connect the black S-VIDEO plug to the VCR instead of the
yellow VIDEO plug.
2. Connect the free square plug to the AV IN/OUT jack of your camcorder.
3. Insert the previously recorded cassette into the camcorder.
4. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO.
5. Press the play button to begin playback.
6. Press the stop button when finished.
or rewind the picture will have some interference or noise. This is
- 25 -
and rewind buttons to find the